Back Up And Restore Configuration Settings - TP-Link CR1900 User Manual

Chapter 11
3 Select Enable SNTP.
4 Enter the IP address or domain name of
3, and the router will get the time from the NTP Server automatically. In addition, the
router has some common built-in NTP Servers that will synchronize automatically
once it connects to the internet.
5 Select your local time zone from the
6 Click Save.
7 After setting the system time, you can set
needs. Select the check box to enable
time and then click Save.
11 3

Back Up and Restore Configuration Settings

The configuration settings are stored as a configuration file in the router. You can back
up the configuration file to your computer for future use and restore the modem router
to a previous settings from the backup file when needed. Moreover, if needed you can
erase the current settings and reset the modem router to the default factory settings.
To back up configuration settings
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Click Advanced
3 Click Backup to save a copy of the current settings to your local computer. A conf.
bin file will be stored to your computer.
To restore configuration settings
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Click Advanced
3 Click Browse to locate the previous backup configuration file, and click
4 Wait for the restoring and then the modem router will automatically reboot.
To reset the modem router to factory default settings
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
> System Tools > Backup & Restore
> System Tools > Backup & Restore
Time Server 1, Time Server 2
Time Zone drop-down list.
Daylight Saving Time
Daylight Saving Time, set the start and end
page.
page.
Administrate Your Network
or Time Server
according to your
Restore.
68