Table of Contents
Advertisement
Chapter 5
5 1
Use Firewall
You can detect certain attacks with some firewall features and block certain data from
getting through your network with different protection levels.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to
Advanced
3. Configure the basic firewall settings according to the following explanations:
•
Firewall Protection:
recommended that you keep this feature enabled.
•
Protection Level:
Select the firewall protection level appropriate to your needs. All the
allowed services will be shown in the
protection level you select.
•
Block Fragmented IP Packets:
against fragmented IP packets from flooding the network with server requests. Select
the checkbox to enable this feature.
•
Port Scan Detection:
based hackers who attempt to gain unsolicited access to your network by detecting
open IP ports on your gateway. Select the checkbox to enable this feature. You can
check details of detection on the
•
DoS Protection:
This feature can protect your private local network against DoS
(denial of service) attacks from flooding the network with server requests. Select the
checkbox to enable this feature.
4. Click Save.
>
Security
>
Firewall.
Select the checkbox to enable Firewall Protection. It is
Allow Services
This feature helps to protect your private local network
This feature can protect your private local network from internet
Firewall Log
section according to the firewall
page.
Network Security
18
Hide quick links:
Advertisement
Table of Contents
