Installation Of The Filter; Care And Cleaning - Klarstein 10031697 Manual

INSTALLATION OF THE FILTER

Activated carbon filter can be used to trap odors. Normally the activated carbon filter
should be changed at three or six months according to your cooking habit. Activated
carbon filter cannot be washed or recycled. Remove the filters like the picture:
1 The carbon filters are located at either end of the motor. Turn the charcoal filters
anti-clockwise until they are unscrewed.
2 Apply reverse procedure to install the charcoal filter.

CARE AND CLEANING

The cleaning of the grease filter mesh
Open the glass and take out the grease filter. Please do not use the corrosive detergent
on it. Keeping this filter clean will keep the appliance running correctly. Pls clean it strictly
follow the guidelines below:
Method 1:
Put the mesh into 40-50°C clean water, pour on detergent, and soak for 2-3 mins.
Wear gloves and clean with a soft brush. Please do not apply too much pressure, as the
mesh is delicate and will damage easy.
Method 2:
If instructed to do so, it can be put into a dishwasher, set the temperature at around
60°C.
auf
zu
EN
23