Advertisement
Installation Instructions Product-Ident: 45180
8 Adaptation amplifier - crossover circuit / Insulation of the car doors
8.1
Insulation of the car doors - Important tips against vibration-noise (see attached installation recommendation)
8.2 Adaptation amplifier - crossover circuit:
Lead 1x speaker cable (1,5 - 4 qmm) from amplifier to the crossover circuit:
mount of crossover circuit: car door / behind the door card
9 Insulation of the back side of the door card
In order to avoid vibration noise insulate all cables with insulation tape e.g.
9.1 Insulate the backside of the door card e.g. with self-adhesive vibration suppressing insulation
fleece – see attached installation recommendation.
ATTENTION / danger ! No insulation behind the side-airbags!
IMPORTANT:
No insulation material behind loudspeaker, door latch lever and fastening points of the
door card!
08.10.09 10:23
Example
Seite 6 von 8
Advertisement
