Cisco IR510 Hardware Installation Manual page 20

IR510 WPAN Gateway and IR530 WPAN Range Extender Hardware Installation Guide
IR530 Series Resilient Mesh Range Extender Installation
To unpack the IR530 Resilient Mesh Range Extender:
1. Open the shipping container and carefully remove the contents.
2. Return all packing material to the shipping container and save it.
3. Verify that all items listed in the Package Contents section are included in the shipment. If any item is damaged or missing, notify your
sales representative.
Mounting the IR530 Range Extender
You can mount the IR530 on a pole using a mounting bracket. To attach the mounting bracket to the pole, see
To attach the IR30 to the mounting bracket, see
IR530 Range Extender Orientation
When mounting the IR530 Range Extender on a pole, ensure that the extender is oriented with the antenna pointing downwards (see
Figure 11). Note: After you attach the IR530 to the mounting bracket, you must properly ground the unit before connecting power cables.
See Grounding the IR530 Range Extender, page
Attaching the IR530 Range Extender to the Pole Mounting Bracket
Use the four screws and washers that ship with the product to attach the IR530 the mounting bracket
ft-lbs.
Figure 11.
22.
20
Figure 10.
(Figure 11) using a torque of 6 to 7