Autoadapt Chair Topper User Manual page 15

15
Hoisting and stowing Chair Topper
Inspect chain bolts and all chain connecting points. Inspect master links and chain blocks for positive securement
and/or possible damage. Replace, resecure or correct as needed.
Inspect chains for lubrication, damage, misalignment, binding or twisting. Lubricate with light oil.
EN
Clean before lubricating - realign or correct any other conditions as needed.
Inspect chain boxes (up/down chain enclosure) for obstructions or damage. Clean or correct.
Inspect the side bearing channel on both sides for damage, securement or obstructions. Clean, resecure or correct
as needed.
Inspect all mounting hardware (securing framework, hearings, linkage, motors, etc.) for loos, damaged or missing
parts. Replace, tighten, adjust or realign as needed.
Inspect main wiring harness for possible damage, securement or poor electrical connections.
Correct, resecure or repair as needed.
Inspect control harness for possible damage; securement, or poor electrical connections.
Correct, resecure or repair as needed.
Inspect power cable for damage or poor connections. Correct or replace as needed.
Inspect ground wires damage, securement or poor connections. Correct, resecure or repair as needed.
Inspect the harness/wire socks attachment points on wind screen of vehicle.
Replace worn or missing cable tie/cable tie attachment feet.
Inspect fold springs to see if detached or worn. Correct or replace.
Inspect fold linkage for excessive wear, damage, lubrication and securement.
Lubricate with light oil, resecure or realign as needed.
Inspect pop rivets/washers (securing ABS plastic shell) to see if worn or missing. Replace or resecure as needed.