Maintenance - Autoadapt Chair Topper User Manual

14
Chair Topper Hoisting and stowing

Maintenance

Perform maintenance at the scheduled intervals according to the number of cycles or
elapsed time whichever comes first. Always contact your dealer for disassembly.
Wash and/or wax the ABS plastic in the same manner which you care for your vehicle.
Inspect all bearings for wear. Lubricate with light oil.
Fold linkage pivot points. Lubricate with light oil.
Remove and clean any debris or obstructions.
Inspect bearing mounting for proper securement. Correct and replace if needed.
Inspect mounting hardware (frame and topper securement). Make sure there are no loose or missing parts.
Replace, tighten or resecure as needed.
Repeat all checks listed in the 4 weeks or 100 cycles. Repeat maintenance procedures.
Inspect sprockets for securement, slippage, alignment or any damage. Replace, realign or resecure as needed.
Inspect chain channels (plastic for damage, securement or obstructions. Clean, correct or replace.