Timer; Hdr - CamRanger User Manual

Timer

The Imer tab allows the use of the CamRanger as an intervalometer as well as specifying exposure
Imes when the camera is in bulb mode.
Time Lapse
• The entry fields are used to specify the iniIal delay before
the first shot, the number of shots to take, and the delay in
between each shot.
• Afer configuring the sehngs, press the "Start" buKon to
begin the intervalometer process.
• The intervalometer commands are stored on the
CamRanger device, the Windows computer does not need
to remain on or connected once the intervalomiter
command is iniIated.
• The "Shot Delay" should not be used for precision Iming,
parIcularly when the delay is only a few seconds or less.
• Once an intervalometer sequence is begun, the Imer tab
will provide a countdown of the current Imelapse as well
as a buKon to cancel the Ime lapse.
Bulb
• The Bulb controls are only enabled when the camera is in bulb mode and the camera supports
remote bulb shots.
• The entry fields are used to specify the iniIal delay before the first shot and the length of the
exposure.
• Afer configuraIon, press the "Start" buKon to begin the bulb process.
• The bulb commands are stored on the CamRanger device and the Windows does not need to
remain on or connected.

HDR

The "HDR", or Advanced BrackeIng, tab can be used to generate a series of photos with varying
exposures.
• Advanced BrackeIng is only enabled when the camera is in
Manual exposure mode.
• The Property field specifies the camera property to be
varied. There are three opIons: ShuKer Speed, Aperture,
and ISO.
• The IniIal Delay field specifies the amount of delay, if any,
to take before beginning the brackeIng sequence.
• The iniIal value for the selected property is set with the
Start Value field.
• The total number of images to capture is specified by the
© CamRanger – Patent Pending
10