Recent Thumbnails; Main Image View; Live View Images; Captured Images - CamRanger User Manual

Recent Thumbnails
• As images are captured, the thumbnails are automaIcally downloaded and displayed along the top
of the screen. The thumbnails may be scrolled lef and right when more are downloaded than can
fit.
• A thumbnail may be selected to view the corresponding image. The image is downloaded and
displayed in the main image view. The currently selected thumbnail is indicated with a light grey
box.
• When both a JPG and RAW file format is captured, only the JPG thumbnail is displayed.
• A small red "R" icon on the upper right of the thumbnail indicates that it is a RAW image. A small
green "T" indicates TIFF, while no icon is used to indicate JPG formaKed images.
• Note: only thumbnails for images captured within the current CamRanger session will be displayed.
Main Image View
Live view and captured images are displayed within the main image view.
Live View Images
To iniIate live view, click on the "eye" buKon located within the camera acIon controls on the
boKom right of the applicaIon screen. In live view, the image on the screen is automaIcally updated
as live view images stream in. The exact frame per second rate is very much dependent on
CamRanger WiFi signal strength, the camera, and the Windows specs. However, assuming a good
connecIon, live view frame rate will be about 7 – 18 fps.
When in live view, the main image view may be clicked once to focus at that point. Note that for
Canon cameras, the outer edges of the image cannot be focused upon. Double clicking will zoom in
the viewing window and double clicking again returns to regular size.
Canon cameras can display the live view image on the camera and Windows and allow the user to
trigger images with the camera by acIvaIng the camera's live view buKon a"er starIng live on the
CamRanger applicaIon. Nikon cameras do not allow any control of the physical camera while live
view is acIve.
Captured Images
Captured images can be displayed in the main image view in one of two ways, by selecIng a
thumbnail in the thumbnails secIon of the applicaIon or through the Auto-View Images feature. The
© CamRanger – Patent Pending
7