Download Print this page

Furinno 13089 Assembly Instruction

Econ storage organizer cabinet w/bins

Advertisement

Quick Links

STEP 6
Attach Panel(B)to Panel(F),as shown.
unfinished
surface
finished
unfinished
edge
surface
unfinished
surface
unfinished
surface
STEP 8
Attach Panel(C)to assembled unit,as shown.
finished
edge
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
STEP 10
Attach Panel(H)to the back side using Power
Pin(6)and Hammer.
(6)x20pcs
Recommended Maximum Weight
20
*Unit in Pound(lbs)
STEP 7
Attach Panel(D)to assembled unit,as shown.
finished
edge
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
STEP 9
Attach Panel(A)to assembled unit and lock all
the Cam-Lock Nut(2)using screwdriver.
finished
edge
unfinished
surface
unfinished
surface
unfinished
surface
unfinished
surface
STEP 11
Upright the unit and slot in Bins(7)&(8).
(7)&(8)x4pcs
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Approx. 30 minutes
Approx. 15 minutes
Approx. 10 minutes
Approx. 5 minutes
Recomm. 2 Person
Recomm. 1 Person
No Tools Required
Tool Required
Tool Required
Customer Service
Tel/Fax: 281.500.9372
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: support@furinno.com
www.furinno.com
Assembly Instruction
Furinno Econ Storage Organizer
Cabinet w/Bins
13089
MODEL
:
DIMENSION :
23.8"(W) x 32.3"(H) x 9.3"(D)
1308920140428

Advertisement

loading
Need help?

Need help?

Do you have a question about the 13089 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Furinno 13089

  • Page 1 Assembly Instruction surface unfinished unfinished surface surface Furinno Econ Storage Organizer Cabinet w/Bins STEP 8 STEP 9 13089 MODEL Attach Panel(C)to assembled unit,as shown. Attach Panel(A)to assembled unit and lock all DIMENSION : 23.8”(W) x 32.3”(H) x 9.3”(D) the Cam-Lock Nut(2)using screwdriver.
  • Page 2 STEP 1 Hardware List Parts List 1.1 Install Cam-Lock Screw(1)to pre-drilled holes on Panel(A),(C)&(D)using screwdriver. 1.2 Install Cam-Lock Nut(2),Short Dowel(4)and Nail Leg(3)on Panel(C)&(D). Top Panel Cam-Lock Screw 1pcs 6pcs (2)x1pcs (2)x1pcs (1)x1pcs (4)x2pcs (1)x2pcs (4)x2pcs Bottom Panel 1pcs Cam-Lock Nut 6pcs finished (1)x1pcs...