Specifications And Equipment - Eaton ET1280 Set Up And Operating Manual

Specifications and Equipment

ET1280
Crimp Machine
Accessories Die Holder Kit
FT1380P-2-4
A plate and mounting
hardware that can hold
two cages. This kit
attaches to the back of
the Eaton ET1280
crimp machine.
Fitting Locators
FT1330-XL
For easy positioning of
fittings into FT1380
"M" series die cages.
EATON ET1280 Crimp Machine Set Up and Operating Manual E-EQCR-TM003-E September 2005
Machine Only:
Crimper Dimensions: 13"W x 25.75"D x 13"H
Weight: 141 lbs.
Pump Requirements
Reservoir Capacity: 50 cubic inches or more (820 cc)
Pressure Rating: 10,000 psi (690 bar)
Machine w/110V Power Unit:
Crimper Dimensions: 13"W x 25.75"D x 29"H
Weight: 253 lbs.
Pump Requirements
Reservoir Capacity: 50 cubic inches or more (820 cc)
Pressure Rating: 10,000 psi (690 bar)
Die Cages
Note: Can order FT1380-275-size for tool steel dies vs. powdered metal dies.
FT1380-200-M070 FT1380-200-M180†
FT1380-200-M090 FT1380-200-M210*†
FT1380-200-M120 FT1380-200-M240*†
FT1380-200-M150*† FT1380-200-M280†
* Included in the 5 die cage package.
†
Included in the 8 die cage package.
FT1380-200-M320*†
FT1380-200-M370*†
FT1380-200-M420
FT1380-200-M465†
3