Frymaster 3000 Quick Reference

3000: Quick Reference
Pressed Individually:
Scroll menu, program-
ming options.
Pressed Simultane-
ously: Launches Pol-
ish.
Removable
Menu Strip
Exit Menus,

ON/OFF

Scan pro-
grammed menu
Left Side Product Buttons: 1-5 and 11-15
items.
are products for left side display.
ON/OFF

Press ON/OFF button. Fryer enters melt cy-
cle before switching to full temperature and
heating to setpoint.

Exit melt cycle by pressing and releasing the
Exit Cool button or any programmed product
button. Displays show Exit Melt? on left and
YES NO on the right. Press  to exit.

Cooking


COOL displayed: Press product button or
Exit Cool button; fryer heats to setpoint and
displays READY.
Press product button and drop product.

- - - - displayed: The vat temperature is out
of the READY zone.

READY displayed: Press product button and
drop product.

SHAKE displayed: If shake is needed, alarm
sounds.

DONE displayed: Press product button to
cancel alarm.
Check actual,
setpoint tem-
Exits/Enters COOL MODE.
peratures and
software ver-
sions.
Product Button LED: Lit when
product is cooking or holding.

HOLD displayed: Press blinking product
button to cancel hold alarm.

Cancel Cook Cycle: Press and hold product
button.

Controller Button Navigation


Product: Press to start cook cycle. Press at
end of cook cycle to stop alarm.

Exit/Scan: Press once, all programmed
product buttons are lit; Select Product dis-
played. Press product button to view product
name. Press right arrow to view parameters.
Press Exit/Scan again to repeat. Press Exit/
Scan twice to escape.

Left/Right Arrows (): Navigate options
in left display. Press and hold simultaneously
to launch Polish cycle.

Up/Down Arrows (): Navigate options in
right display. Press and hold simultaneously
to change language if programmed.

Exit Cool: Press to enter/exit Cool Mode.

Thermometer (): Fryer ON: Press and
Access programming, re-
Pressed Individually: Scroll
spond to left-display prompts
menu, programming options.
and check recovery.
Pressed Simultaneously:
Changes to 2nd language if
Access Filter Menu if
programmed.
enabled
Right Side Product Buttons: 6-10 and
16-20 are products for right side display.
release for setpoint/left; vat temp/right.

Thermometer (): Fryer OFF: Press and
release to display temperature, time, date,
system version, 3000 version. Press and hold
for ATO board versions.

Checkmark(  ): Fryer OFF: Press and hold
3 seconds: Scroll filter usage; Press and hold
10 seconds: Main Menu-Product setup

Checkmark(  ): Fryer ON: Press and re-
lease: Check recovery. Press and hold 4 sec-
onds: Info Mode.
*Filter: Press and hold: Filter options: Filter,

Clean and Filter, Dispose, and Boil Out (only
with controller off).
 *Filter: Press and release: Cooks Remaining.
(*NOTE: Functions only if enabled)
Product buttons.
Press to begin
and end a cook
cycle. Press and
hold to stop a
cook.
ON/OFF
819-6986 JUN 2013