Adjust The Ringer - Samsung SCH-r410 Series User Manual

Tip: Assign pictures to Contacts entries. The entry's assigned picture appears in the display when you
receive a call from that entry. See "Assigning a Picture to a Contacts Entry" on page 56.
The phone continues to notify you of the call until one of the following events occur:
You answer the call.
•
The calling party ends the call.
•
The call is sent to voicemail.
•
Call Notification Features
Your phone notifies you of a call in a variety of ways.
Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium, Medium,
•
Medium/High, High, or Vibrate/High.
Different ring types or melodies to distinguish callers.
•
Name display with caller ID. (If the caller's name is programmed into your
•
Contacts).
Information about the last 90 each of incoming, missed, and outgoing calls are
•
automatically stored to a call log.
Set Call Ringer Volume
In standby mode, press the Volume key on the right side of the phone.
1.
Press the Volume key up or down to set the call ringer volume as desired.
2.

Adjust the Ringer

In standby mode, press the Volume key ( ) on the right side of the phone
1.
up or down. Options are:
• Ringer Off
• Vibrate
• Low
• Low/Medium
Press
2.
OK
standby mode.
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the MENU (left) soft key (
then pressing the
of your phone to adjust the ringer volume setting.
Note: The Vibrate icon (
icon ( ) appears in the display when the call ringer is set to Vibrate/High.
27
• Medium
• Medium/High
• High
• Vibrate/High
once you're satisfied with the setting. The phone returns to
, , , and
) appears in the display when the call ringer is set to Vibrate. The Vibrate/Ring
keys. Use the Volume key on the right side
),