Vibrate Mode - Samsung SCH-r410 Series User Manual

To disable Speakerphone Mode, press and hold
appears in the display.
Note: Your phone automatically enters Speakerphone Mode when you dial a call using the QWERTY keypad
and the called phone begins ringing.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
To enter Silent Mode:
•
In standby mode, press and hold
appears in the display and your phone returns to standby mode.
To exit Silent Mode:
•
While in Silent mode and standby mode, press and hold
Silent Mode" briefly appears in the display and your phone returns to
standby mode.

Vibrate Mode

In standby mode, repeatedly press the volume key (
appears in the display.
The volume key is on the upper right side of phone.
Adjust the Ringer
In standby mode, press the volume key (
1.
up or down. Options are:
• Ringer Off
• Vibrate
• Low
• Low/Medium
When you are satisfied with the setting, press the
2.
returns to standby mode.
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the MENU (left) soft key (
then pressing the
side of your phone to adjust the ringer volume setting.
Note: The Vibrate icon (
Ring icon ( ) appears in the display when the phone is in Vibrate/High mode.
• Medium
• Medium/High
• High
• Vibrate/High
, , , and
) appears in the display when the phone is in Vibrate mode. The Vibrate/
Your Phone's Modes
until "Speakerphone Off"
. "Entering Silent Mode" briefly
) down until Vibrate
) on the right side of the phone
OK
keys. Use the Volume key on the right
Understanding Your Phone
. "Exit
key. Your phone
),
20