Table of Contents
Advertisement
Three-way Calling
Call two other numbers and connect them to your call using three-way calling.
In standby mode, enter the number for the first party in your call, then
1.
press
When connected, ask the other party to remain on the line. Press
2.
place them on hold.
Enter the second party's phone number and press
3.
When the second party answers, press
4.
Manual Pause Calling
To manually call a number with pause(s) without storing it in your Contacts list:
In standby mode, enter the number you wish to call.
1.
Press the Options (right) soft key (
2.
options appear in the display:
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
Use the Up/Down navigation or arrow keys to highlight the desired pause.
3.
Press the
4.
number sequence.
Press
5.
Tip: Press the Save (left) soft key (
the number frequently.
Speed Dialing
Speed Dialing lets you place a call to any Contact stored in your Contacts list by
dialing the Contact's Location number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail) through 9.
In standby mode, press and hold the number key corresponding to the
desired Contact's speed dial number.
Example: To speed dial the Contact assigned speed dial 5, press and hold the
key.
23
.
key or
key to enter the highlighted pause into the
OK
to call the number.
or
) to store pauses along with the number if you plan to call
.
to connect all three parties.
or
). The following pause
key or the
to
Advertisement
Table of Contents
