Activating Your Phone - Samsung SCH-r410 Series User Manual

Portable dual-mode mobile phone
Hide thumbs Also See for SCH-r410 Series:
Table of Contents

Advertisement

Low battery indicator
The battery indicator (
level. Monitor the battery strength and ensure your battery is adequately charged.
Three bars (
An empty battery icon (
A blinking empty battery icon (
three minutes before the battery is too low to operate the phone.
If you continue to use your phone without charging its battery, the phone will shut
down.

Activating Your Phone

Contact your Wireless Carrier and follow their instructions for obtaining service, if
necessary. We suggest that you read this guide to fully understand the services your
phone supports.
Turning Your Phone On
Press and hold the
1.
Note: As with any other radio-transmitting device, do not touch the antenna while using your phone as this
can affect call quality and can cause the phone to operate at a higher power level than is necessary.
The phone begins searching for a network signal.
2.
Once the phone finds a signal, the time, date, and day appear near the top
3.
of the display.
You're now ready to place and receive calls.
4.
Note: If you are outside of your carrier's coverage or roaming area, the No Service icon (
the top of the phone's display. If you cannot place or receive calls, try later when service is available,
or at another location.
Turn Your Phone Off
Press and hold the
off.
Note: If your phone is on and you press
prevents your phone from being turned off accidentally.
7
) in the upper-right corner of the display indicates power
) indicate a full charge.
) indicates a near empty battery.
) and a tone sounding indicate you have two to
key until the display lights.
key for two or more seconds. Your phone powers
for less than one second, the phone will not power off. This
) appears at

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sch-r420

Table of Contents