Table of Contents
Advertisement
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
In standby mode, press and hold
•
display and your device returns to standby mode.
While in Manner mode and standby mode, press and hold
•
Off" briefly appears in the display and your device returns to standby mode.
Vibrate Mode
In standby mode, press the M
1.
(for CUSTOMIZE),
Ring Vibration. The following options appear in the display:
• Ring Only — An incoming call plays the ringtone selected with the Ring
options.
• Vibrate — An incoming call causes the device to vibrate.
• Mute — An incoming call causes a message to appear in the display.
• Vibrate then Ring — An incoming call causes the device to vibrate then play a
ringtone.
• Ring and Vibrate — An incoming call causes the device to play a ringtone and
vibrate.
Use the Up and Down navigation keys to highlight Vibrate, then press the
2.
key.
Note: The Vibrate icon (
Adjust the Ringer
In standby mode, press the M
1.
(for CUSTOMIZE),
Volume. The Volume screen appears in the display.
Use the Up and Down navigation keys to highlight Ring.
2.
Use the Left and Right navigation keys to adjust the Ring volume to one of
3.
its five settings. The current ringtone sounds at the selected level.
When you are satisfied with the setting, press the
4.
returns to the Sound menu.
22
. "Silent Mode On" briefly appears in the
ENU
(for Settings),
) appears in the display when the device is in Vibrate mode.
ENU
(for Settings),
(left) soft key (
), then press
(for Sound), and
(left) soft key (
), then press
(for Sound), and
key. Your device
. "Silent Mode
for
for
Advertisement
Table of Contents
