Selecting Additional Settings; Safety Lock - Miele FNS 37492 iE Operating And Installation Instructions

Selecting additional settings

Certain settings for the appliance can
only be selected in settings mode.
While you are in settings mode, the
door alarm and any other fault mes-
sages are suppressed automatically,
but the alarm symbol  lights up on
the display.
Available settings

Activate and deactivate the

safety lock


Turn the ice maker on/off (set
the amount of water; rinse the
ice maker; set the cleaning po-
sition for the ice cube tray)
 Switch acoustic signals on/off

Change the brightness of the
display
 Switch Sabbath mode on/off
All available settings for the ice maker
are described in "Making ice cubes"
and "Cleaning and maintenance".
All other available settings are de-
scribed below.
26
Safety lock 
The safety lock can be activated to pre-
vent:
– the appliance being switched off by
mistake,
– the temperature being changed by
mistake,
– selection of the SuperFrost function,
– settings being adjusted by mistake (it
is only possible to deactivate the
safety lock).
This prevents the appliance being
switched off or settings adjusted with-
out your knowledge; for example, by
children.
Activating and deactivating the safety
lock
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.