Building in the appliance
With 5/8" (16 mm) thick unit walls
only:
Clip the spacers and onto the
right of the hinges.
Open the appliance door.
80
Remove the cover .
Screw the fixing plate loosely into
the top left of the appliance using the
screws . So that you can adjust the
position of this part, do not tighten
the screws yet.
Push the contact component onto
the fixing bracket .
Screw the fixing bracket loosely
into the bottom of the appliance us-
ing the screws . So that you can
adjust the position of this part, do not
tighten the screws yet.