Advertisement
INSTALLATION INSTRUCTIONS (CONT'D)
1996-00 Hyundai Elantra:
RADIO REMOVAL:
1. Carefully pop out shifter trim bezel and remove one screw at the bottom of the radio dash bezel.
2. Pop out dimmer control switch, unplug and remove.
3. Extract (1) screw from dimmer switch location.
4. From driver's side underdash area (above gas pedal) unhook temperature control cable.
5. Carefully pry out on radio dash bezel, to unsnap, unplug all switches, vacuum lines and remove.
6. Extract (4) screws securing radio, unplug and remove.
USE THE SHADED BRACKETS, AND INDICATED SPACERS.
LEFT SIDE
ATTACH
ELANTRA
SPACERS
USE THIS TAB
2001-02 Hyundai Elantra Sedan:
RADIO REMOVAL:
1. Remove ash tray and extract (2) Philips screws, pull off bottom dash bezel, disconnect, and remove.
2. Extract (2) Phillips head screws along top of instrument cluster.
3. Using panel removal tool, pry out dash bezel carefully, disconnect, and remove.
4. Extract (6) Philips head screws securing radio and pocket, disconnect, and remove.
USE THE SHADED BRACKETS, AND INDICATED SPACERS.
LEFT SIDE
ATTACH
ELANTRA
SPACERS
USE THIS TAB
SCOSCHE STEREO INSTALLATION COMPONENTS
RIGHT SIDE
USE THIS TAB
FRONT OF KIT
RIGHT SIDE
USE THIS TAB
FRONT OF KIT
1995-02 Hyundai Sonata:
RADIO REMOVAL:
1. Carefully pry up on the gear shifter trim bezel with a panel removal tool to release the clips and remove.
2. Extract the (1) screw at the bottom of the radio trim bezel.
3. Using a panel removal tool carefully pry out on the radio trim bezel to release the fastening clips, unplug all the
connectors, and remove the bezel.
4. Extract the (6) screws securing the radio / pocket assembly to the dash, unplug all the connectors and remove.
ATTACH
ELANTRA
SPACERS
USE THIS TAB
1997-02 Hyundai Tiburon
RADIO REMOVAL:
1. Unscrew shift handle and remove.
2. Unsnap and remove shifter trim bezel.
3. For automatic, place car in Low, or for manual place shifter back in 4th gear.
4. Open ashtray, carefully pull back on Radio / console trim bezel to release, and disconnect lighter to remove.
5. Extract (4) screws securing radio, unplug and remove.
ATTACH
ELANTRA
SPACERS
USE THIS TAB
INSTALLATION INSTRUCTIONS (CONT'D)
USE THE SHADED BRACKETS, AND INDICATED SPACERS.
LEFT SIDE
FRONT OF KIT
USE THE SHADED BRACKETS, AND INDICATED SPACERS.
LEFT SIDE
FRONT OF KIT
RIGHT SIDE
USE THIS TAB
RIGHT SIDE
USE THIS TAB
STEREO DASH KITS
Advertisement
