Electrical System - Bolton Tools ZX45A Operating Manual

End mills
Cutter arbor
Taps
Collets
Adapters and sleeves
10.Specification of the T-slot
Please refer to figure, purchase or
make T-bolts and other table
top fixtures to these dimensions.

ELECTRICAL SYSTEM

WARNING: 1.A fuse must be connected between machine and power.
2.The ground terminal of machine must be grounded
properly
3.Don't open electrical box during operation,if
something is wrong with machine, please ask repairman
for help.
SPECIFICATIONS OF THE FUSE
Voltage
110V
220V
380V
THREE PHASE CIRCUIT
phase Single phase
20A
10A
9
Three phase
5A
5A