Open The Chassis; Installing And Removing Memory - Intel NUC8i5BEK User Manual

User Guide for NUC8i5BEK, NUC8i3BEK
This guide tells you how to:
Install and remove memory
•
Install an M.2 SSD
•
Install a VESA mount bracket
•
Connect power
•
Install an operating system
•
Install the latest device drivers and software
•

Open the Chassis

Unscrew the four corner screws on the bottom of the chassis and lift the cover.

Installing and Removing Memory

Intel NUC Kits NUC8i5BEK and NUC8i3BEK have two 260-pin DDR4 SO-DIMM sockets. Memory
requirements:
 1.2V low voltage memory

2400 MHz SO-DIMMs

Non-ECC
Find compatible 2.5" hard drives at the Intel® Product Compatibility Tool for:
 Intel NUC Kit NUC8i5BEK
 Intel NUC Kit NUC8i3BEK
For a list of tested memory, go to the
3
page on the Support site.
System Memory