Intel NUC8i7BEK User Manual
Hide thumbs Also See for NUC8i7BEK:

Advertisement

Quick Links

User Guide for NUC8i7BEK, NUC8i5BEK, NUC8i3BEK
Intel® NUC Kit NUC8i7BEK
Intel® NUC Kit NUC8i5BEK
Intel® NUC Kit NUC8i3BEK
User Guide
1

Advertisement

Table of Contents
loading

Summary of Contents for Intel NUC8i7BEK

  • Page 1 User Guide for NUC8i7BEK, NUC8i5BEK, NUC8i3BEK Intel® NUC Kit NUC8i7BEK Intel® NUC Kit NUC8i5BEK Intel® NUC Kit NUC8i3BEK User Guide...
  • Page 2: Before You Begin

    If such a station isn’t available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Installation Precautions When you install and test the Intel NUC, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: •...
  • Page 3: Open The Chassis

    Open the Chassis Unscrew the four corner screws on the bottom of the chassis and lift the cover. Installing and Removing Memory Intel NUC Kits NUC8i5BEK and NUC8i3BEK have two 260-pin DDR4 SO-DIMM sockets. Memory requirements: • 1.2V low voltage memory •...
  • Page 4: Install So-Dimms

    User Guide for NUC8i7BEK, NUC8i5BEK, NUC8i3BEK Install SO-DIMMs If you plan to install just one SO-DIMM, install it in the lower memory socket. To install the SO-DIMMs, follow these steps: 1. Observe the precautions in "Before You Begin" on page 2.
  • Page 5: Install An M.2 Ssd

    User Guide for NUC8i7BEK, NUC8i5BEK, NUC8i3BEK Install an M.2 SSD Intel NUC Kits NUC8i5BEK and NUC8i3BEK support 80mm and 42mm SSDs. Find compatible M.2 SSDs at the Intel® Product Compatibility Tool: • Intel NUC Kit NUC8i7BEK • Intel NUC Kit NUC8i5BEK •...
  • Page 6: Close The Chassis

    User Guide for NUC8i7BEK, NUC8i5BEK, NUC8i3BEK Close the Chassis After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by hand with a screwdriver to avoid over-tightening and possibly damaging the screws. Attach and Use the VESA Bracket (Optional) Follow these instructions to attach and use the VESA mount bracket: 1.
  • Page 7 User Guide for NUC8i7BEK, NUC8i5BEK, NUC8i3BEK 2. Attach the two slightly larger black screws to the bottom chassis cover of the Intel NUC. 3. Slide the Intel NUC onto the VESA mount bracket.
  • Page 8: Connect Power

    Connect Power Country-specific power cords are included in the Intel NUC Kit box. Connect AC power Each Intel NUC model includes either a region-specific AC power cord or no AC power cord (only the power adapter). Product codes Power cord type BOXNUC8i5BEK No power cord included.
  • Page 9: Install An Operating System

    Install an Operating System Refer to Supported Operating Systems for a list of Intel-validated Windows* operating systems and versions of Linux that have been reported as compatible by Intel NUC owners. Refer to Operating System Installation for system requirements and installation steps.

This manual is also suitable for:

Nuc8i5bekNuc8i3bek

Table of Contents