Intel BOXNUC8i7BEKQA User Manual

Intel BOXNUC8i7BEKQA User Manual

Intel nuc 8 enthusiast/home, a mini pc with windows 10 -

Advertisement

Quick Links

Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
NUC BOXNUC8I5BEKPA2
User Guide for NUC8i7BEKQA and NUC8i5BEKPA
Intel® NUC 8 Enthusiast, a Mini PC with Windows® 10 – NUC8i7BEKQA
Intel® NUC 8 Home, a Mini PC with Windows® 10 – NUC8i5BEKPA
User Guide
1
o cerca il tuo prodotto tra le
migliori offerte di PC Desktop e Workstation
Intel NUC 8 Home

Advertisement

Table of Contents
loading

Summary of Contents for Intel BOXNUC8i7BEKQA

  • Page 1 PC Desktop e Workstation User Guide for NUC8i7BEKQA and NUC8i5BEKPA Intel® NUC 8 Enthusiast, a Mini PC with Windows® 10 – NUC8i7BEKQA Intel® NUC 8 Home, a Mini PC with Windows® 10 – NUC8i5BEKPA User Guide...
  • Page 2: Before You Begin

    If such a station isn’t available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Installation Precautions When you install and test the Intel NUC, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: ...
  • Page 3: Open The Chassis

    Unscrew the four corner screws on the bottom of the chassis and lift the cover. Upgrade System Memory  The Intel NUC Mini PC NUC8i7BEKQA have two 260-pin DDR4 SO-DIMM sockets, pre-installed with two 8GB DDR4 2400 MHz SO-DIMM. ...
  • Page 4 User Guide for NUC8i7BEKQA and NUC8i5BEKPA Find compatible memory modules in the Intel Product Compatibility Tool:  NUC8i7BEKQA  NUC8i5BEKPA NOTE If you plan to install only one memory module, install it in the lower memory socket. To upgrade or add memory, follow these steps: 1.
  • Page 5 Replace the computer’s cover and reconnect the power cord. Changing an M.2 SSD or Intel® Optane™ Memory Module  The Intel NUC Mini PC NUC8i7BEKQA support an 80mm or 42mm m.2 SSD, pre- installed with one 512GB NVMe m.2. ...
  • Page 6: Close The Chassis

    User Guide for NUC8i7BEKQA and NUC8i5BEKPA Close the Chassis After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by hand with a screwdriver to avoid over-tightening and possibly damaging the screws. Attach and Use the VESA Bracket (Optional) Follow these instructions to attach and use the VESA mount bracket: 1.
  • Page 7 User Guide for NUC8i7BEKQA and NUC8i5BEKPA 2. Attach the two slightly larger black screws to the bottom chassis cover of the Intel NUC. 3. Slide the Intel NUC onto the VESA mount bracket.
  • Page 8: Connect Power

    User Guide for NUC8i7BEKQA and NUC8i5BEKPA Connect Power Each Intel NUC model includes either a region-specific AC power cord or no AC power cord (only the power adapter). Product codes Power cord type BOXNUC8i7BEKQA No power cord included. An AC power cord needs to be purchased separately.
  • Page 9: Set Up Microsoft Windows

    User Guide for NUC8i7BEKQA and NUC8i5BEKPA Set Up Microsoft® Windows® 10 Microsoft Windows 10 is already installed on the Intel NUC. The first time you start the computer, you are guided through the Windows 10 setup steps, including:  Selecting your region and language.
  • Page 10: Operating System Recovery

    User Guide for NUC8i7BEKQA and NUC8i5BEKPA Operating System Recovery There’s a Windows recovery partition on the Intel NUC. You can use this partition to Refresh, Reset, or Restore Windows. Here is what each of these actions do: Refresh If your PC isn't performing as well as it once did, and you don't know why, you can refresh your PC.

Table of Contents