Sokkia SET 550 Setup And Operation page 32

Resection initializes the X,Y,Z coordinates of the
Resection initializes the X,Y,Z coordinates of the
instrument. Save this as a point (ex. G1S02 for group
instrument. Save this as a point (ex. G1S02 for group
2, instrument station #2) since it represents a
2, instrument station #2) since it represents a
surveyed coordinate
surveyed coordinate
Once the instrument is calibrated the mirror targets
Once the instrument is calibrated the mirror targets
can be taken down and used elsewhere
can be taken down and used elsewhere
The instrument height should be entered before
The instrument height should be entered before
resection is calculated
resection is calculated
You can only begin shooting resection point 1 from
You can only begin shooting resection point 1 from
the resection point #3 or higher coordinate entry
the resection point #3 or higher coordinate entry
screen
screen
Resection Notes
Resection Notes