Sokkia SET 550 Setup And Operation page 31

Resection continued
Resection continued
Press [CALC] or [YES] on last point to
Press [CALC] or [YES] on last point to
display the calculated instrument
display the calculated instrument
coordinates and the standard deviation of
coordinates and the standard deviation of
easting ( σ E ) and northing (
easting ( σ E ) and northing (
[OK] to finish Resection, and then
[OK] to finish Resection, and then
[YES] to set the
[YES] to set the
azimuth to the 1
azimuth to the 1
Press [RESULT] to display the residuals of
Press [RESULT] to display the residuals of
each shot point - large deviations identify
each shot point - large deviations identify
" bad " points
" bad " points
If there are no problems press {Esc} to
If there are no problems press {Esc} to
return to main resection screen
return to main resection screen
The standard deviations are a measure of
The standard deviations are a measure of
the accuracy. They should be in the range of
the accuracy. They should be in the range of
several cm ' s for most surveys
several cm ' s for most surveys
Press
Press
σ N).
σ N).
backsight
backsight
st shot point
st shot point
...
...