Sokkia SET 550 Setup And Operation page 23

Backsight
Backsight
Select " Backsight
Select " Backsight
" Angle " from the menu
" Angle " from the menu
Sight the landmark/target of known
Sight the landmark/target of known
azimuth relative to instrument with
azimuth relative to instrument with
telescope
telescope
Select " Angle "
Select " Angle "
that the menu displays the zenith
that the menu displays the zenith
angle (ZA) and current horizontal
angle (ZA) and current horizontal
angle (HAR) and is waiting for you
angle (HAR) and is waiting for you
to enter the known angle with
to enter the known angle with
[EDIT]
[EDIT]
Note: if you enter an azimuth angle
Note: if you enter an azimuth angle
as " 85.4514 " this will be interpreted
as " 85.4514 " this will be interpreted
as 85 degrees, 45 minutes, 14
as 85 degrees, 45 minutes, 14
seconds
seconds
IMPORTANT! You must select
IMPORTANT! You must select
[OK] to accept the angle.
[OK] to accept the angle.
<Esc> to leave this screen!
<Esc> to leave this screen!
by Angle continued
by Angle continued
" and then
" and then
from menu. Note
from menu. Note
Never use
Never use
...
...