Omron NT11S Operation Manual page 84

System Maintenance
Check on communication with the support tool
68
Check the communication between the NT11S and support tool by performing the
following operations, starting from the system menu.
SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
PT Setting
I/O Check
Initialize Memory
Memory Switch
Quit
LED Check
LCD Check
Page:
Key Check
Tool I/F Input Check
TOOL I/F INPUT CHECK
S The data received from the connected support tool is displayed in hexadecimal
notation.
S To quit the check on communication with the support tool, press any two function
keys simultaneously.
Select
with the
TER".
Select "I/O Check" with the
key, then press "ENTER".
Display the next page by press-
Page:
ing the
Select "Tool I/F Input Check"
with the
TER".
Section 3-10
"Maintenance Mode"
key, then press "EN-
key.
key, then press "EN-