Strap Tool Kit - Cisco 1240 Hardware Installation Manual

Chapter 4 Mounting the Router
D E C . 2 0 1 1 — E F T R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Figure 4-3

Strap Tool Kit

When to Use
Use the tool in the Strap Tool Kit to attach the steel straps included in the
are required to install the mounting plate on poles larger than 5 inches (12.7 cm) in diameter.
The tool in the Strap Tool Kit is manufactured and supported by BAND-IT. For more information about
Note
the tool, see http://www.band-it-idex.com.
Item
1
2
Figure 4-4
OL-12345-01
Band Strap Kit Contents
Description
Strap tool
Strap tool documentation (not shown)
Strap Tool Kit Contents
Cisco 1240 Connected Grid Router Hardware Installation Guide
Contents of the Mounting Kits
Band Strap Kit. Steel straps
4-5