Chapter 6 Installing The Router; Before Installing; Prepare The Installation Site; Read The Safety Information - Cisco 1240 Hardware Installation Manual

Connected grid router

Hide thumbs Also See for 1240:

Table of Contents

D E C . 2 0 1 1 — E F T R E V I E W D R A F T — C I S C O C O N F I D E N T I A L

Installing the Router

This chapter describes how to install the Cisco 1240 Connected Grid Router and includes the procedures

for basic router installation and for optional installation steps. The procedures you follow depend on

your network environment and requirements. This chapter contains the following sections:

•

Read this section and the

installation procedures in this chapter.

The procedures in this chapter assume that you have prepared the installation site according to the

information in the

Before performing any of the tasks in this chapter, read the safety warnings in this section and in the

Installation Safety and Site Preparation

Many of the components discussed in this chapter are sensitive to electrostatic discharge (ESD) damage,

which can occur when electronic cards or components are handled improperly, results in complete or

intermittent failures.

OL-26223-01

Before Installing, page 6-1

Related Information, page 6-2

Basic Hardware Installation, page 6-2

Additional Router Connections, page 6-10

Installing Modules and Antennas, page 6-24

Installation Safety and Site Preparation

C H A P T E R

chapter before following any

chapter.

Cisco 1240 Connected Grid Router Hardware Installation Guide

6-1

Table of Contents