Accessory Kit; Prepare Your Location - Cisco 8200 Series Hardware Installation Manual

Prepare for Installation
• ESD wrist strap or other grounding device.
• Antistatic mat or antistatic foam.
• Two-hole ground lug (1).
• Pair of mounting brackets.
• Grounding cable (6 AWG), sized according to local and national installation requirements; the required
• A crimping tool large enough to accommodate the girth of the lug.
• Wire-stripping tool.
• M4 screws to fix brackets (16).
• M4 screws to fix a ground lug (2).

Accessory Kit

The following table contains the accessory kit PID and the items present in the accessory kit of the routers.
The rack mount kit present in the accessory kit contains the screws and brackets required for installation.
Router
Cisco 8201 Router
Cisco 8202 Router

Prepare Your Location

This section illustrates how the building that houses the chassis must be properly grounded to the earth ground.
Note
Unless specified otherwise, the image is only for representational purposes. The rack's actual appearance and
size may vary.
length depends on the proximity of the switch to proper grounding facilities.
Accessory Kit-1
8200-1RU-KIT
8200-2RU-KIT
Items in Accessory Accessory Kit 2
Kit -1 (NEBS)
Rack mount kit and NA
ground lug kit
Rack mount kit and NA
ground lug kit
Hardware Installation Guide for Cisco 8200 Series Routers
Accessory Kit
Items in Accessory
kit-2
NA
NA
7