Page 1
BCBZ Series Zone Clock Frequently Asked Questions………………………..…………… Page 5 TROUBLESHOOTING BCBZ Series Zone Clock Troubleshooting…………….…………………………………… Page 6 FOR SYSTEM WIRING DIAGRAMS, PLEASE REFER TO SYSTEM INFORMATION Page 1 50 Spring Street, P.O. Box 575, Ramsey, New Jersey 07446 Tel: 201-934-8500, Fax: 201-934-9832, Web Site: www.bogen.com...
6. Screw in the 10 x 1.5 sheet metal screw into the anchors. 7. Hang the clocks on to hooks on the top and bottom of the housing. Page 2 50 Spring Street, P.O. Box 575, Ramsey, New Jersey 07446 Tel: 201-934-8500, Fax: 201-934-9832, Web Site: www.bogen.com...
Page 3
Mode Communication Alert ON: 12 hour mode ON: Brightest ON: 5 minutes OFF: 24 hour mode OFF: Bright OFF: 1 hour Page 3 50 Spring Street, P.O. Box 575, Ramsey, New Jersey 07446 Tel: 201-934-8500, Fax: 201-934-9832, Web Site: www.bogen.com...
Page 4
Press the top button to advance the hour to the user’s preference for a positive offset. Press the bottom button to advance the hour to the user’s preference for a negative offset. Page 4 50 Spring Street, P.O. Box 575, Ramsey, New Jersey 07446 Tel: 201-934-8500, Fax: 201-934-9832, Web Site: www.bogen.com...
Clocks, the BCSM Master Clock, the BCBD 2000 or the BCGPS. What protocols can be run on the BCBZ series digital zone clock? The BCBZ series zone clock can use a 2 wire digital communication system or RS485 protocol can be utilized. Please refer to system information for wiring diagrams.
There is data noise bleeding into the intercom line, what do I do? Reduce the transmission rate from the master clock to once a minute. Page 6 50 Spring Street, P.O. Box 575, Ramsey, New Jersey 07446 Tel: 201-934-8500, Fax: 201-934-9832, Web Site: www.bogen.com...
Need help?
Do you have a question about the BCBZ Series and is the answer not in the manual?
Questions and answers