Before Using Rugged Pda - Casio CASSIOPEA IT-10 SERIES User Manual

Before Using Rugged PDA

・ This product has been designed and manufactured under stringent
quality control. Should you suspect Rugged PDA is defective or
malfunctioning, contact your original dealer or authorized distribu-
tor. Repair and maintenance are subject to the terms and conditions
of the Warranty.
The mis-operation of electronic product may create a risk of injury
caused by a fire or electric shock, etc. To avoid the accident, be
sure to follow the instructions below.
Follow the cautions
The cautions for Rugged PDA are described on pages from 6 to
12.
Do not use Rugged PDA if it does not work correctly
Contact your original retailer or authorized distributor.
If Rugged PDA works abnormally
If Rugged PDA malfunctions, or emits smoke, strange odor or noise,
etc., immediately shut down the power, remove the battery pack, and
unplug the power cord of the AC adaptor from the power outlet. Con-
tact your original retailer or authorized distributor.
CASIO COMPUTER CO., LTD. shall not be held liable for any loss or
・
claims due to using this product except as instructed to do so in this
User's Manual.
CASIO COMPUTER CO., LTD. shall not be held liable for any loss or
・
claims (lost profits, interruption of business, corruption or loss of
memory data, etc.) by you or any third party due to the use of this
product or the inability to use this product for a specific purpose,
except as specifically stipulated by law.
Unauthorized copying of this product or its software is prohibited.
・
Product Application
●
This product is intended for use as a general office computing device.
・
CASIO makes no warranties that this product is fault-tolerant. It is not designed,
・
manufactured or intended for use in any equipment or system (such as traffic
control devices, safety devices, medical devices, etc.) where the malfunction
or misoperation of Rugged PDA could lead directly to death, personal injury,
or serious damage to physical assets.
Rugged PDA
●
Power Requirements
Plug the AC adaptor into a power outlet rated for 100V to 240V AC, 50/60Hz
・
only.
Do not connect Rugged PDA to the same outlet of another device that gener-
・
ates electrical noise. Such a device can corrupt data in Rugged PDA.
13