Front and Back Panels Basic Installation Unencrypted Composite Analog HDMI Out Video Audio Unencrypted HDMI Video Source Video Source RF Output +45 dBmV Back of HDb2840 Modulator Coax cable connects Optional Delay Matched Ethernet to network or to coax network...
You can set the RF broadcast channels using the 502-510 662-670 822-830 For instance, if you enter RF Channel front panel controls. In many cases, your ZeeVee # “21” then RF Channel # “22” modulator will require only these configurations. 510-518 670-678 830-838 automatically populates.
THE RF TAB Connecting with Maestro Allows you to change the RF 1. Connect your computer directly to the ZeeVee modulator power output. using a standard Ethernet cable (not a cross-over cable) or connect the unit and your computer to any LAN that has a Manage All allows you to view and configure all DHCP server.
Feed the audio to the ZeeVee unit and send it to the HDTV with the video. Then take the audio out from an HDTV or external Equipment is considered proof of purchase.
Chromium, Cadmium, Polybromated Biphenyls, Polybromated Diphenyl Ether, Pentabromodiphenyl +44 1494 956677 Phone Ether, Octabromodiphenyl Ether, Decabromodiphenyl Ether. EMEAsales@zeevee.com Stephen Metzger Vice President of Engineering Direct all specific inquires to the ZeeVee, Inc. Engineering Department September 2014 Proudly designed and built in the USA...
Need help?
Do you have a question about the HDb2840-NA and is the answer not in the manual?
Questions and answers