Olivetti FK-507 Service Manual page 57

7. Soft Switch
MODE
Bit:
020
Bit Feature
7 Displays # of reports.
6 Trace protocol.
5 Display number of error
lines/transmission speed.
4 Select monitor interval for
line.
3 Display error codes.
(Reports)
MODE
Bit:
022
Bit Feature
5 Zoom setting default value
for TX *
NOTE
• The features with (*) are settable by users. *: Screen setting
50
Factory setting bit
7 6 5 4 3 2 1 0
0 1 0 0 0 0 0 0
Logic
0
No Yes
No Yes
No Yes
Phase A All
phases
No Yes
Factory setting bit
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0
Logic
0
Auto No
zoom reduction
Service Manual
Field Service Ver. 2.0 Dec. 2008
HEX:40
Description
1
"Yes" displays # of pages on phone line
in addition to ordinary # of papers.
"Yes" prints result of protocol trace after
completing communication. If next com-
munication is proceeded before this
printing, information on previous com-
munication protocol will be deleted.
"Yes" displays # of error lines/transmis-
sion speed on touch panel and outputs
port for auto checking.
Specifies interval for monitoring phone
lines for G3 communication.
"Yes" displays error codes (6 digits) in
reports.
HEX: 00
Description
1
Y109971-7