Ni-Mh Battery Replacement - Olivetti FK-507 Service Manual

3. Disassembly/assembly
3.2

Ni-MH battery replacement

1. Check on the screen that the memory capacity still available for use reads 100%.
NOTE
• If the memory capacity does not read 100%, let the machine output contents of the
memory or wait until the machine completes transmission.
2. Turn OFF the main power switch.
3. Remove the IR rear cover.
See P.46 of the main body service manual.
[2]
[1]
[1]
[1]
8
[1]
A0F0F2C006DA
[3]
[2]
A0F0F2C010DA
[2]
A0F0F2C011DA
Service Manual
Field Service Ver. 2.0 Dec. 2008
4. Remove seven screws [1], and
remove the MFBU shield cover [2].
5. Disconnect the connector [1], and
remove the harness from the wire
saddle [2] and the edge cover [3].
6. Tie band [1] is cut with nippers, and
the Ni-MH battery [2] is replace.
Y109971-7