Advertisement
Installation Guide
4. Fasten the eye bolt on the housing and fix the housing to the
ceiling, using the cable to prevent it from falling.
5. Fix the housing to the ceiling using three screws.
6. Fit and turn the Speed Dome Camera into the slot, locating it
in the direction marked on the mounting bracket, and fix it
using the rotation control screw.
7. Connect the mounting bracket to the connector of the
Speed Dome Camera as shown in the figure.
8. Fix the external cover to the housing using three screws.
10
SPEED DOME CAMERA ACCESSORIES
Component Name
■ Wall Mounting
FAN
BRACKET HEATER
PLATE FIX DOME
RUBBER GASKET
DOME COVER
RING DECORATION
■ ■
Ceiling Mounting
CEILING PLATE
FAN
CEILING PIPE
BRACKET HEATER
PLATE FIX DOME
CEILING FLANGE
RUBBER GASKET
HOUSING OUT DOOR
DOME COVER
RING DECORATION
HOUSING OUT DOOR SHIELD
BRACKET P.C.B
WALL BRACKET
HOUSING OUTDOOR
HOUSING OUTDOOR SHIELD
BRACKET P.C.B
■ ■
Embedded Mounting
HOUSING IN CEILING
RING DECORATION
(INCEILING TYPE)
11
SPEED DOME CAMERA ACCESSORIES
Advertisement
