Tools And Equipment; Keyboard Arrangements; Cleaning Procedures - IBM 6580 Product Support Manual

STRAP IDs
LANGUAGE SUPPORT
92 96
Australia/New Zealand 1
Austria/Germany 29
Belgium (Flemish) 247
Canada-England
37
Canada-F rance/B ilinguaJ 39
Czech-Czech 83
Czech-Slovak 85
Denmark 57
Finland 248
France/Belgium (AZ)
251
F
ranee (Qwerty) 252
Greece (Latin) 75
Hong Kong (Latin) 119
Hungary
91
Italy (S.A.)
41
Japan (English)
69
Netherlands 43
Norway 55
Poland 93
Portugal 63
Rumania 87
S. Africa 81
Spain 45
SP Speak/Puerto Rico 25
Sweden 53
SWitzerland-Germanv 51
Switzerland-France 49
Turkey 79
U.K.llsrael
67
U.S.
1
U.S. 249
U.S. Dvorak 250
Yugoslavia (Latin) 95
"X's Indicate Jumper Positions
o
X X X
X X X
X X
X X
X X
X X
X X
X X
X
X X
X X
X X
X
X
X X
X X
X X
X X
X X
X X
X X X
X X
X X
X X
X X
X X
X X X
X X
KEYBOARD - Keyboard Arrangements, Tools & Equipment, Cleaning Procedures
-11-
10 JUMPERS'
3 4 5 6
X X X X
X
X
X X X
X X
X X
X X
X X
X X
X
X
X X
X
X
X X X
X X X
X
X
X
X
X
X X X
X X
X X
X X
X X
X X X
X
X X X
X X X X
X X
X
X
X
X
The Keyboard Assembly requires no scheduled preventive
maintenance.
TOOLS AND EQUIPMENT
The following equipment is required to service the key-
board:
Keybutton Puller (PIN 9900373)
Alcohol Pad (PIN 9900679)
Lint-free Cloths (PIN 2108930 or PIN 2123106), or
Disposable Cleaning Cloths
(PIN
1650800)
CLEANING PROCEDURES
Plastic parts and painted covers can be cleaned with IBM
cover cleaner, PIN 450891, or a mild non-abrasive hand
soap. Other solvents or cleaners are not recommended as
damage or discoloration of plastic or painted parts can
result.
Cleanliness is important when working on the keyboard.
Any particle between the key module fly plate and the pad
card is a potential problem.
Before any keyboard disassembly, prepare a smooth, clean
work area by wiping contamination away with an alcohol
pad. Gently tap, brush, and shake the keyboard assembly to
remove any loose particles which could get into the pad
card and fly plate area during disassembly and reassembly.
The pad card and key module fly plates are cleaned by
carefully wiping each with an alcohol pad followed by a
lint-free cloth. Care should be taken not to dislodge or
remove fly plates from key modules.
Some minor liquid spills, such as soft drinks or coffee with
sugar, can be removed by first washing the pad card and
affected fly plates with a lint-free cloth dampened with a
mixture of water and a mild hand soap. Rinse with a water-
dampened lint-free cloth, then clean with an alcohol pad
and dry with a lint-free cloth.
NOTE: Sticky key modules must be replaced. A severe
liquid spill may necessitate replacement of the entire
keyboard assembly.