Error Log Dump Procedure - IBM 6580 Product Support Manual

-102-
DIAGNOSTICS - Error Log Dump Procedure
ERROR LOG DUMP PROCEDURE
The error log in RAM and system memory is dumped to
diskette by using the following procedure:
• Leave the system in the normal operating mode.
• Remove all diskettes from the diskette unit. (The
Error Log Dump Procedure will write over the infor·
mation on the diskette.)
• Press the Memory Record Button once. Error codes
will be displayed. (Refer to Figure)
• Press the Memory Record Button a second time.
• Load the Memory Record Diskette in the left drive
(drive 0).
When the Memory Record Diskette is loaded, the error log
is automatically dumped to the diskette from RAM.
TASK SELECTION
I Memory xxxx I
Kyb xxx
ID
ITEM
a
b
c
d
Typing Tasks:
Create, Revise or Paginate Documents
Work Diskette Tasks:
Delete or Duplicate Documents,
Duplicate, Condense or
Erase/Initialize (Name) Diskette,
Print Index of Diskette Contents, Change
Document or Dikette Name, Recover Documents
Program Diskette Tasks:
Default Formats, Duplicate Setups,
Printer and Work Station Description,
Duplicate and Erase Program Diskette
Spelling Tasks
*900* FFF2 0111 1000 00 003C 0034 0170 1A9AIA
Error Log Dump Error Codes
The error log dump messages
('xxx')
are listed below:
900 - A software error has been detected.
902 - Dump complete.
903 - Read/write error on dump diskette.
904 - Dump diskette improperly formatted.
90A - Indicator that the left drive has become ready.
90B - Left drive is not ready.
900 - Left drive is ready.
90F - Left drive is not present.