Safety And Certifications - David White AutoLaser 3110-GR Instruction Manual

Thank you for purchasing the AutoLaser 3100 Sereis Automatic Electronic Self-
Leveling Rotary Laser Level. Please read this manual thoroughly before operation
EN
MODELS
48-3110-GR
48-3150
48-3175
Copyright© 2005 David White. All rights reserved
The information contained herein is proprietary information of David White, and is subject to
change without notice.
This document shall not be copied or otherwise reproduced without David White's written consent.

SAFETY AND CERTIFICATIONS

Working safely with this instrument is possible only when the operating and safety information are
read completely and the instructions contained therein are strictly followed.
The use of controls, adjustments, or the performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Do not stare into the laser beams. Do not direct the laser beam at other persons. Do not
disassemble the instrument or attempt to perform any internal servicing. Laser class is indicated
on the instrument.
Repair and servicing of this laser are to be performed only by David White or authorized
service centers.
This laser complies with all applicable portions of title 21 of the Code of Federal Regulations set by:
the Dept. Of Health, Education, and Welfare; the Food and Drug Administration; the Center for
Devices; and the Bureau of Radiological Health.
The laser has also been tested and complies with the CE certification requirements set forth in the
EC regulations 89/336/EEC and EN 61000-6-1 (EN50082-1), EN 61000-6-3 (EN50081-1) and IEC 60-825-1.
6 • 3100 SERIES
AutoLaser 3110-GR Visible Horizontal Beam Electronic Self-Leveling
Single Grade Rotary Laser
AutoLaser 3150 Horizontal/Vertical Visible Split-Beam Electronic
Self-Leveling Rotary Laser. Dual grade with remote control
AutoLaser 3175 Horizontal/Vertical Visible Split-Beam Electronic
Self-Leveling Laser with Dual Dial-in Grade.