General Safety Rules - David White LR 410H Owner's Manual

!
WARNING
shock, fire and/or serious injury.
All labels on your laser are for your safety and must not be removed. Removing
labels increases the risk of exposure to laser radiation. Do not throw this
manual away.
If glass light house breaks when dropped, contact customer service
immediately. Broken glass can cause laceration hazard and unit to
lose its IP rating.
DO NOT direct the laser beam at persons or animals and do not
stare into the laser beam yourself. This tool produces laser class
2 laser radiation and complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice No. 50, dated
June 24, 2007. This can lead to persons being blinded.
DO NOT remove or deface any warning or caution labels.
Removing labels increases the risk of exposure to laser radiation.
Use of controls or adjustments or performance of procedures other than those
specified in this manual, may result in hazardous radiation exposure.
ALWAYS make sure that any bystanders in the vicinity of use are made aware
of the dangers of looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into
the laser beam intentionally or unintentionally. Serious eye injury could result.

GENERAL SAFETY RULES

Read all instructions. Failure to follow all instructions listed
below may result in hazardous radiation exposure, electric
Dave White's SitePro, LLC | Otterbein, Indiana | www.dwsitepro.com
IEC 60825-1:2007-03
≤ 3.43 mW @ 630 - 670 nm
Laser radiation. Do not stare into the beam or view directly with optical instruments. Class 2
lasers product. Complies with 21 CFR 1040.10 & 1040.11 except for deviations persuant to
Laser Notice 50, June 6, 2007
Radiación laser. No mire hacia el rayo. No mirar con instrumentos ópticos. Producto láser de
Clase 2. Cumple con las normas 21 CFR 1040.10 y 1040.11, excepto por las desviaciones
conforme al Aviso para láseres 50, 6 de junio de 2007
Rayonnement laser. Ne pas regarder le rayon. Ne pas regarder avec instruments .
Produit laser de Classe 2. Conforme à 21 CFR 1040.10 et 1040.11, sauf pour les
écarts suivant l'Avis laser 50, 24/6/2007
Made in China
4 X C 1.5 V / Li-ion
-6-