Improper Use; Required Expert Knowledge Of The Installer - RADEMACHER RolloTron Basic 1100 Assembly Manual

i
7.1 Intended use
Operating conditions
◆ Only operate the RolloTron Basic 1100 in dry rooms.
◆ A 230 V / 50 Hz power supply, together with a site-
provided isolating device (fuse, MCB), must be per-
manently available at the installation location.
i

7.2 Improper use

Using the RolloTron Basic 1100 for purposes other than
previously mentioned is impermissible.
i

7.3 Required expert knowledge of the installer

The electrical connection, installation and commission-
ing of the RolloTron Basic 1100 must only be carried
out by a qualified electrician in accordance with the
instructions in this manual.
◆ An easily accessible 230 V / 50 Hz socket must be
available at the installation site if the enclosed con-
necting cable with Euro plug is being used.
◆ The roller shutters must run up and down smoothly
and should not stick.
◆ The mounting surface for the RolloTron Basic 1100
must be flat.
There is a risk to life caused through short circuiting
and electric shocks if the RolloTron Basic 1100 is
used outside.
◆ Never install or operate the RolloTron Basic 1100
outside.
EN
59