Table of Contents
Advertisement
ENGLISH
Preparation
Using the Lithium Ion Battery Pack
✤
The amount of continuous recording time available depends on.
- The type and capacity of the Battery pack you are using.
- How often the zoom function is used.
It is recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack
1. Attach the Battery pack to the Camcorder.
2. Connect the AC Power adapter to an AC Cord and
connect the AC Cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the
Camcorder.
4. Turn the Power switch to Off, and the charging
indicator will start to flash, showing that the battery is
charging.
Blinking time
Once per second
Twice per second
Three times per second
Blinking stops and stays on
On for a second and off for a second
5. When the battery is fully charged, disconnect the Battery pack
and the AC Power adapter from the Camcorder.
Even with the Power switched Off, the Battery pack will still
discharge.
[ Notes ]
I
The Battery pack may be charged a little at the time of purchase.
I
To prevent reduction in the life and capacity of the Battery pack,
always remove it from the Camcorder after it is fully charged.
I
The amount of continuous recording time available depends on:
- The type and capacity of the Battery pack you are using.
- How often the zoom is used.
- Type of use (Camcorder/Camera/With LCD screen etc.).
- Ambient temperature.
It is recommended to have additional battery packs available.
I
Even when the Power switched Off, the Battery pack will still discharge if it is
left attached to the device.
Power Switch
Charging rate
Less than 50%
50% ~ 75%
75% ~ 90%
90% ~ 100%
Error - Reset the Battery pack and the DC cable
4
< Charging indicator>
✤
I
I
I
I
~
~
~
21
21
Hide quick links:
Advertisement
Table of Contents
