ENGLISH
Playback
Playing Back a Tape You have recorded on the
LCD Screen
✤
The playback function works only in Player mode.
✤
You can monitor the playback picture on the LCD screen.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
(VP-D353(i)/D354(i)/D355(i) only)
3. Insert the tape you wish to view. (see page 36)
4. Open the LCD screen.
I
Adjust the angle of the LCD screen and set the
brightness or colour if necessary.
5. Press the
(REW) button to rewind the tape to the
starting point.
I
To stop rewinding, press the
I
The Camcorder stops automatically after rewinding is
complete.
6. Press the
(PLAY/STILL) button to start playback.
I
You can view the picture you recorded on the LCD
screen.
I
To stop the play operation, press the
Adjusting the LCD Bright/Colour during Playback
✤ You can adjust the LCD Bright/Colour during playback.
✤ The adjustment method is the same procedure as used in
Camera mode. (see page 32)
[ Notes ]
I
You can also view the picture on a TV screen, after
connecting the Camcorder to a TV or VCR.
(see page 71~72)
I
Various functions are available in Player mode.
(see page 73)
I
For searching and viewing still images recorded onto tape. (see page 68)
1
(STOP) button.
3
(STOP) button.
5
✤
✤
I
I
I
I
I
✤
✤
I
I
I
(REW)
69
69