Samsung VP D 352 i User Manual page 85

ENGLISH
USB Interface (VP-D352(i)/D353(i)/D354(i)/D355(i) only)
Using the PC Camera Function
✤
To use the PC Camera function, the DV Driver, Video Codec and DirectX 9.0.
programmes must be installed in the PC.
✤
You can use this Camcorder as a PC CAMERA.
✤
When you connect to a Web site that provides video chatting functions, you
can use your Camcorder for such functions.
✤
When using this camcorder for video conferencing (such as NetMeeting),
voice communication may not be supported depending on the video
conferencing software. In this case, connect an external microphone to the
soundcard of the PC to enable voice communication.
✤
Using the Camcorder with PC Net-meeting programme installed, you can
participate in video conference.
✤
The PC CAMERA's screen size. (Transferred video frame rate for the PC
Camera function is max 15 fps.)
I 320X240 (QVGA) pixels for USB 1.1 connection.
✤
If PC is connected with the USB to the Camcorder, only the Power, Mode,
Zoom and NITE PIX switchs can be operated.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
(VP-D353(i)/D354(i)/D355(i) only )
3. Connect one end of the USB cable to the USB jack on
the Camcorder and the other end to the USB connector on
your computer.
✤
Video Codec
✤
✤
✤
✤
✤
I
✤
1
2
85 85