Rear Components - HP Z43 User Manual

Rear components

Component
1 Power button
2 Function buttons
3 Master power switch
4 Power connector
5 Audio-out (headphone)
jack
6 HDMI port
7 Mini DisplayPort port
8 DisplayPort port
9 USB Type-C port
(upstream)*
10 USB Type-A ports (2)
(downstream)
11 Security cable slot
12 USB Type-A port
(upstream)
Function
Turns the monitor on or off.
Navigate through the OSD menu based on the indicators above the buttons
that are activated while the OSD menu is open.
NOTE: You can assign the function buttons in the OSD menu to quickly
select the most commonly used operations. See
buttons on page 16 for more information.
Turns on or off all power to the monitor.
NOTE: Putting the switch in the Off position will yield the lowest power
state for the monitor when not in use.
Connects a power cord.
Connects optional powered stereo speakers, headphones, earbuds, a
headset, or a television audio cable.
WARNING! To reduce the risk of personal injury, reduce the volume before
using headphones, earbuds, or a headset. For additional safety information,
see the Product Notices provided with your product.
Connects the HDMI cable to a source device.
Connects the Mini DisplayPort cable to a source device.
Connects the DisplayPort cable to a source device.
Connects a USB Type-C cable to a source device.
Connect the USB Type-A cables to source devices.
Connects a security cable to a stationary object.
NOTE: The security cable is designed to act as a deterrent, but it may not
prevent the monitor from being mishandled or stolen.
Connects a USB Type-A cable to a source device.
Assigning the function
Product features and components 3