Date/Time Display
You can set the date and time to display on the LCD screen.
• Before you use the "Date/TimeDisplay" function, you must set the date and time. ➥page 34
settings
Off
Current date and time information is not displayed.
Date
Displays the current date.
Time
Displays the current time.
Date&Time
Displays the current date and time.
The date/time will read "01/JAN/200900:00" in the following conditions:
•
- The built-in rechargeable battery becomes weak or dead.
•
This function depends on the"DateType" and"TimeType"setting.
LCD Brightness
You can adjust the brightness of the LCD screen to compensate for ambient lighting
•
conditions.
Pressing the Controlbutton ( ) will brighten the screen whereas pressing the Control
•
button ( ) will darken the screen.
A brighter LCD screen setting consumes more battery power.
•
If you adjust the LCD brightness when the ambient lighting is too bright, it is hard
•
to see the monitor indoors.
•
The LCD Brightness feature does not affect the brightness of images to be stored.
•
You can adjust the LCD Brightness from -15 to 15.
LCD Colour
You can change the colour impression of the screen with a variety of colour options by
•
adjusting the red and blue colour range.
When you set red and blue colour range, the higher the fi gures, the brighter the LCD
•
screen will be.
You can adjust the LCD colour (red/blue) from -15 to 15, using the Control button
•
( / / / / OK).
You can manipulate the colour displayed on the LCD screen by adjusting the colour ratio
•
of red and blue.
Adjusting the colour display of LCD screen does not affect the image to be recorded.
•
Higher the value will produce brighter LCD screen when adjusting colour range of red and blue.
•
contents
on-screendisplay
None
01/JAN/2009
00:00
01/JAN/200900:00
0:00:00 [475Min]
STBY
9999
LCD Brightness
0
Exit
Adjust
OK
STBY
0:00:00 [475Min]
9999
LCD Colour
Red
0
Blue
0
Exit
Move
OK
English_89