Important Information On Use - Samsung SMX-K40BP User Manual

Memory camcorder
Hide thumbs Also See for SMX-K40BP:
Table of Contents

Advertisement

important information on use

BEFORE USING THIS CAMCORDER
This camcorder is designed exclusively for use with the high-capacity built-in memory (16GB (SMX-K44
only), (32GB (SMX-K45 only)) and an external memory card.
This camcorder records video in H.264/AVC (MPEG4 part 10/Advanced Video Coding) format compliant
with the Standard resolution (SD-VIDEO) format.
Please note that this camcorder is not compatible with other digital video formats.
Before recording important video, make a trial recording.
-
Play back your trial recording to make sure the video and audio have been recorded properly.
The recorded contents cannot be compensated for:
-
Samsung cannot compensate for any damages caused when recording is not made normally or recorded
contents cannot be played back because of a defect in the camcorder or memory card.
Also, Samsung cannot be held responsible for your recorded video and audio.
-
Recorded contents may be lost due to an error when handling this camcorder or memory card, etc. Samsung
shall not be held responsible for the loss of recorded contents, and cannot compensate for any damages.
Make a backup of important recorded data.
-
Protect your important recorded data by copying the files to a PC. We recommend copying the data to your
PC or other recording media for storage. Refer to the software installation and USB connection guide.
Copyright: Please note that this camcorder is intended for consumer use only.
-
Data recorded on a card in this camcorder from other digital/analogue media or devices is protected by the
copyright act and cannot be used without permission of the copyright owner except for personal enjoyment.
Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly
recommended that you obtain permission beforehand.
IMPORTANT NOTE
Handle the liquid crystal display (LCD) with care:
-
The LCD is a very delicate display device: Do not press its surface with excessive force, hit it or prick it with a
sharp object.
-
If you push the LCD surface, display unevenness may occur. If unevenness does not disappear, turn the
camcorder off, wait for a few moments, and then turn it on again.
-
Do not place the camcorder with the open LCD screen down.
-
Close the LCD monitor when not using the camcorder.
English_v

Advertisement

Table of Contents
loading

Table of Contents