Test Acknowledgement; Auto Position Interval - Furuno FM-4800 Operator's Manual


MANUAL: Select the soft key, and then you need to send an
acknowledgement manually upon a call request.

AUTO: Select the soft key, and then the radio sends an
acknowledgement automatically upon a call request.

IGNORE: Select the soft key, and then the radio ignores the call
request without sending an acknowledgement.
Press the Menu/DSC control to save the setting and return to the previous
Step 4
screen.

12.6 Test Acknowledgement

This feature allows you to set the acknowledgement mode of DSC test call requests.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > TEST ACK".
Step 2
The "TEST ACK" interface appears on the screen.
Step 3 Select "MANUAL" or "AUTO".

MANUAL: Select the soft key, and then you need to send an
acknowledgement manually upon a call request.

AUTO: Select the soft key, and then the radio sends an
acknowledgement automatically upon a call request.
Press the Menu/DSC control to save the setting and return to the previous
Step 4
screen.

12.7 Auto Position Interval

This feature allows you to set the interval of sending auto position polling to another
vessel.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > AUTO POS INTERVAL".
Step 2
The "AUTO POS INTERVAL" interface appears on the screen.
Select a time interval.
Step 3
87