Test Acknowledgement; Auto Position Interval - Furuno 9ZWFM4850 Operator's Manual

FM-4850 Operator's Manual
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > POSITION ACK".
Step 2
The "POSITION ACK" page appears on the screen.
Select "MANUAL", "AUTO", or "IGNORE".
Step 3

MANUAL: Select the soft key, and then you need to send an
acknowledgement manually upon a call request.

AUTO: Select the soft key, and then the radio sends an
acknowledgement automatically upon a call request.

IGNORE: Select the soft key, and then the radio ignores the call
request without sending an acknowledgement.
Press the Menu/DSC control to save the setting and return to the
Step 4
previous screen.

12.6 Test Acknowledgement

This feature allows you to set the acknowledgement mode of DSC test call
requests.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > TEST ACK".
Step 2
The "TEST ACK" page appears on the screen.
Select "MANUAL" or "AUTO".
Step 3

MANUAL: Select the soft key, and then you need to send an
acknowledgement manually upon a call request.

AUTO: Select the soft key, and then the radio sends an
acknowledgement automatically upon a call request.
Press the Menu/DSC control to save the setting and return to the
Step 4
previous screen.

12.7 Auto Position Interval

This feature allows you to set the interval of sending auto position polling to another
vessel.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > AUTO POS INTERVAL".
Step 2
The "AUTO POS INTERVAL" page appears on the screen.
Select a time interval.
Step 3
Press the Menu/DSC control to save the setting and return to the
Step 4
previous screen.
71
DSC SETUP